Our Top-3 Picks:-
Best water-based solvent : Oil Eater Original Cleaner/Degreaser
“Works well for it’s original use for grease on driveways. Use it to get grease off stove fans or other areas in your kitchen with one swipe.”
Best for toughest greaser: MEGUIAR’S D10801 Super Degreaser
“This stuff rocks and used for detailing cars and cleaning engine bays, tires for dressing, and just general degreasing. Dilute to your required strength and go to town.”
Best non-flammable solvent: Simple Green 19128 Crystal Industrial Degreaser
“This product removed and cleaned far superior to Brake Clean, Carb Cleaner, Mineral Spirits and Denatured Alcohol.”
Do you want to clean the dirt and contaminate your workpiece?
Do you want to remove the oil, grease and grime from your domestic or industrial workpieces?
Are you worried about the effective and user-friendly cleaning of the manufacturing process?
If you agree with all these questions, then all you need is the parts washer solvents. They get easily dissolve and quickly work on the domestic and industrial parts. The best solvent for parts washer includes the non-ingredients – toxic and thus are very safe to use. Listed below are the 10 best parts washer solvents:
Quick Comparison on 10 Best Parts Washer Solvent in 2021
Buying Guide for best parts washer solvent in 2021
The parts washer solvent is one of the essential products used in the cleaning of the dirt, grease, oil and grime from the rims, tires of the engine’s part. Not only does it remove the dirt and leave no white residue but the parts cleaner tank also creates a pleasant environment from the herbal fragrance. Following are some points you must keep in mind before investing in the washer solvent:
(1). GPM of the pump:
GPM stands for the gallons per minute pumped. The GPM truly indicates the performance of the parts washer. For effective cleaning, your washer solvent must depend on the pressure but not the volume. Make sure of the heat produced by your product is intended by you. Also, before investing in your product, determine to check this detail first. It is very important to consider the GPM of the pump; also the horsepower of the pump is quoted instead of the GPM. The GPM is the true indicator of the performance of the parts washer solvent pump but not the horsepower of the pump. Also, the 100 GPM is equal to the one pump horsepower and the 45 GPM is equal to the 5 horsepower.
(2). Level of heat:
Consider the moderate level of heat for bringing in the effectiveness of the performance of the cleaning. Make sure that your products produce and maintain the temperature between the ranges from 170 – 175 degrees on every use. Keep in mind while ordering your washer solvent that it has the large capacity reservoir in the right position for the liabilities. To make your washer solvent work effectively, a high temperature is required. It is important to note that you heat it to the proper temperature while using it. If the temperature is not appropriate then the microbes will not rightfully do their job and will break down the built-up dirt easily. If it is cold, then it does nothing but when it is hot and high at temperature, they easily remove the grease and oil from the parts of the engine.
(3). Easy to clean:
Make sure that your parts washer solvent is easy to clean and it must not be difficult to find the replacement part of your product. Your washer will become useless if one of the parts of your product has any problem and will not get any replacement. Also, it must allow you to have a routine to clean your washer solvents for maintaining and retaining their efficiency for a longer period. You must ensure that you set up the regular interval of the cleaning procedure. Before investing in the washer solvents, you must analyze that your parts washing waste is hazardous or not. For this, you must test the ignitability, pH, toxic metals, and toxic organics by the Solvent Recycling System. Also, it must be less exposure to toxic chemicals and must give equal or better cleaning performance. It must be efficient that it reduces the labor of cleaning and must have large cleaning capacities. Your washer solvent must have a longer solution life and must eliminate any fire hazards.
(4). Local water supply:
If you are planning to buy water-based parts washer solvent, then you must take assurance of the water supply in your area. Your local must supply your water at a regular interval of time to save from any interruption in the cleaning. Before discharging the waste in the sewer you must treat your parts solvent. Also, it is to be noted that you should not discharge your spent washer solvent cleaner in the septic system or stormwater sewer. You must ensure that your waste washer solvent must meet the local discharge limit or must access permission from the local publicly owned treatment works for discharging the waste in the sewer.
(5). Maximize the life of the parts washer solvent
By maximizing the shelf life of your washer solvent, you can reduce the wastes by washing only when necessary. Also to minimize product loss and air emission from evaporation, you must keep your washer solvent closed and away from the fire. The parts cleaning solvent is not necessary to change your solution based on schedule but only when it does not clean the parts adequately. Also, your washer solvent must be non-ignitable. This means that the flashpoint of your washer solvent must be greater than 140°. Avoid the use of the aerosol spray cans near your washer solvent to prevent your washer solvent from the contaminated hazardous solvents.
10 Best Parts Washer Solvent in 2021
(1). Oil Eater Original 1 Gallon Cleaner/Degreaser -(Best water-based parts washer solvent)
This washer solvent deeply cleanses the degreaser and is water-based. It is filled in a container of 1 gallon which is enough to remove grease oil, dirt, and grime, and also controls the standard California South Coast Air quality. This water-based parts washer solvent safely dissolving in almost everything.
- Safely dissolves: Dissolving the grease and oil on almost everything, this oil eater parts washer solvent is biodegradable this is why it is safe to use for all-purpose even in the septic system.
- Non-toxic: USDA approved for non-food surfaces, This water-based solvent is non-toxic water solvent, This is a non-corrosive water solvent, This is a non-hazardous water solvent. And it is safe and user-friendly in cleaning the grease and oil. Also, it is abrasive and petroleum solvents.
- Maximum performance: For the maximum performance and value of this water-based parts solvent, better use the dilution chart on each bottle and thus it becomes concentrated in nature.
- Suitable for household and industrial houses: Either use for cleaning laundry pre-spot, floors, carpet, grills, stove, decks, asphalt, white walls tires or for deep cleaning the engine, machinery, floor scrubbers, pressure washers, or anything more, just add water for the light, medium or heavy-duty cleaning.
(2). MEGUIAR’S D10801 Super Degreaser -(Best meguiars super degreaser)
This Super Degreaser breaks down the toughest greaser quickly and exceeds your expectations. It is suitable for external use only. This meguiars super degreaser works faster by the free rinsing formula and prevents unsightly white residue stains. Also, the pleasant work environment is created by the herbal fragrance as this meguiars super degreaser includes the herbal ingredients.
- Fast-acting: With the free rinsing formula, this meguiars super degreaser dilution acts fast and is strong for the toughest jobs making it the washer solvent. It quickly breaks down even the toughest grease and oil and is suitable for external use only.
- Residue-free: This meguiars super degreaser bottle gives you the residue-free performance by preventing the unsightly white residue stains giving you the deep cleaning.
- Easy to use: User-friendly in nature, this is easy to use to clean the grease and oil. You can spray it on the area you have to clean and wipe it off with a clean cloth.
- Pleasant fragrance: With the herbal fragrance, this meguiar’s d10801 super degreaser 1 gallon gives you a pleasant environment to work in. After cleaning the grease and oil, the bad smell is removed by the herbal ingredient it has in it and spreads the pleasant fragrance.
(3). Simple Green 19128 Crystal Industrial Cleaner/Degreaser – (Best simple green degreaser)
This washer solvent is not only fast but also safe in use and removes the oil, lubricants, and grimes from the washable surfaces. Easy to rinse, it is concentrated in nature and dilutes with the water. This simple green degreaser is best for pressure washing, steam cleaning, and maintenance. It is safe for food preparation areas.
- Critical cleaning: With the Crystal Simple Green formula, this is simple green a degreaser critically cleanses the grease, oil. It is a fragrance-free solution and does not leave back the bad smell.
- Highly effective: Concentrated in nature, this simple green cleaner degreaser is highly effective as well. It is suitable for the all-purpose degreaser and cleaner. Better use this washer solvent for the drive chain and not the body. It is also recommended for cleaning the kitchen cabinet.
- Non-toxic: Not only this, simple green industrial cleaner & degreaser is non – toxic, non-hazardous but also inflammable, biodegradable. Also, it is non-corrosive so there will be no rusting after the cleaning.
- Versatile concentrate: With no added color or fragrance for super visibility, this washer solvent is a versatile concentrate. Also, this non-flammable parts washer solvent works great on the use of bike chains and gears.
(4). Simple Green Extreme Aircraft and Precision Cleaner -(Best aircraft degreaser)
This washer solvent is the best new aircraft degreaser and precision cleaning product is easy going on the tough, built-up grease, oil, dirt, pollution, insect residue and impact soils. Also, when used on the aircraft structural metals, this aircraft engine degreaser does not cause harm to plastics, paints, or coating. It has a high capacity to hold grease washer solvent, oil, and soils in solution during rinsing and cleaning.
- Precision cleaning: Cutting through the tough, built-up grease, oil, dirt, pollution, and insect residue and impact soils, this simple green parts washer solvent precisely cleans.
- Harmless: When used on the aircraft structural metals, this washer solvent does not cause harm to plastics, paints or coating and is safe to use.
- Non-toxic: This washer solvent is safe to use on aluminum, carbon – fiber and any other compound. It gives you the documented conformance when used for testing specifications for the variety of aircraft. Also, the components used in it are non-toxic and the product does not contain any solvent.
- Perfect gift: Ideal for the maintenance of the aircraft and cleaning of the engine, this simple green aircraft degreaser is the perfect product for gifting. Also, no clean air Act Hazardous Air Pollutant or HAPs is included with it.
(5). OIL EATER DEGREASER – 5 GALLON -(Best oil eater 5 gallon cleaner degreaser)
This cleaner degreaser is water-based has a container size of 5 gallons. This oil eater 5 gallon cleaner degreaser is clear yellowish. It removes grease, oil, dirt, grime, and pollution and also removes the fragrance created by the herbal fragrance as it contains the herbal ingredient. Also, this is water based cleaner degreaser and controls the Grime standard California South Coast Air quality.
- USDA approved: This oil eater degreaser 5 gallon controls the Grime standard California South Coast Air quality. Also, it contains a flexible pour spout, reusable pail so it is suitable for cleaning foam cannon chassis trucks.
- Water-based: The water base is alkaline soap in nature thus this washer solvent can be used in cleaning the sonic cleaner and it is in the liquid state. Also, it is biodegradable and is 5 gallons in amount.
- Clear yellow color: The color of this washer solvent is clear yellow which makes it tough on the grease, oil, dirt and grim, and quickly cleanses it. This cleaner is water-based and biodegradable so it can easily be disposable.
- Easy to use: To make dispensing much easier, you can use the hand pump on this five-gallon bucket of washer solvent.
(6). Chemical Guys CLD_104 Grime Reaper Extremely Strong Degreaser -(Best grim reaper degreaser)
This Grime Reaper is the strongest and powerful degreaser that is suitable for the toughest job. It quickly removes the dirt, grease, oil, built-up dirt, brake dust and tar. This grime reaper degreaser can rinse away the dirt from an old engine or the dirty undercarriage. This best solvent for cleaning engine parts also works quickly and easily on the surface having a multi-layer of grease or oil.
- Heavy-duty grease: Concentrated degreaser is suitable for heavy-duty grease and removing the grime. This grim reaper degreaser easily breaks down the bond between the heavy grease and dirt and the surface and rinse away the filth and the grime of the years.
- Super concentrated: The 1 part of the product is enough to dilute the 6 – 9 parts of water. The technology of the super concentration is the secret of this Grime Reaper of ultimate cleaning power. From the smallest stain to the dirtiest engine compartment, this dilution ratio can be adjusted accordingly.
- Rinses clean: Without any white residue of the stain, this washer solvent clean and rinse the undercarriages, filthy engine bays, greasy tires and the dirty wheel arches easily and quickly. This grime reaper extremely strong degreaser is extremely effective in removing the stains from the engines, tires, door jambs by dissolving tough dirt and stains.
- Water-based: Accumulating the filth, this washer solvent is a water-based degreaser and is designed in such a way that it quickly removes dirt, grease and oil.
(7). 3D Grand Blast Engine Degreaser (Best blaster parts washer solvent)
On all the painted surfaces, this best automotive parts washer solvent is easy to use when followed the instructions properly. Furthermore, this blaster parts washer solvent is suitable for the cleaning of the great wheeler and makes the Tire Dressing look much better.
- Fat acting: To loosen up and emulsify the grease, grime and oil, this washer solvent works faster and easier. It breaks down the dirt from the rims and the tires and this is suitable for the pressure washer which makes it the best washer solvent. All you have to do is to wait for 30 seconds and through the nozzle, use the pressure washer or the garden horse.
- Works on the engine: This automotive parts washer solvent is perfect for cleaning the engines, machinery tools, and floors. Also, by decreasing the tires, this washer solvent will make your Tire Dressings look much better. It does not matter in what state your car is, it will also have a problem of excess grease.
- Easy rinse: Easy to rinse, this best washer solvent degreaser can be used on all the painted surfaces by following the instructions properly.
- Concentrated: The 1 part of the product is enough to dilute the 20 parts of water. With such dilute nature, the excess dirt caught up under the hood of your engine is easily removed.
(8). B’laster 128-PWS-4PK Industrial Strength Parts Washer Solvent -(Best solvent free parts washer)
This washer solvent is designed in such a way that it outperforms the usual mineral spirit-based solvents which are mostly found in the recirculating of the part washer. This solvent free parts washer is best in removing the dirt, oil, grease, grime from the plastics, metals, and the painted surfaces quickly, easily and safely. This is the best solvent for parts washer and also for removing dirt quickly.
- Through cut: Easily cuts through the cutting oil, motor oils and the grease from the metals, most plastics and the painted surfaces quickly, easily and safely.
- Residue-free: The residue-free nature makes this the best water based solvent for parts washer that will be painted and therefore it leaves no residue.
- High flashpoint formula: With the high flashpoint formula, this washer solvent is suitable for the usual mineral spirit based solvents which are mostly found in the recirculating of the solvent part washer. It is important to note that this solvent based product will get evaporate over some time.
- Safe for use: This best degreaser for parts washer safely and quickly removes the oil, grease and grime from the metals, plastic and the surface which has paint on it. Also, it is suitable to use this washer solvent on the part washer as it is water-based.
(9). Berryman Products 0996-ARM B-9 Chem Dip Parts Cleaner -(Best parts washer solvent tractor supply)
This parts washer solvent tractor supply is suitable for removing the gums, varnish, carbon, sludge and grease without the process of heating or agitation. It is designed with the formula that this petroleum based dry cleaning solvent provides you the non-chlorinated and inflammable experience of cleaning.
- Fast-acting: With the immersion cleaning, this best solvent for removing gum acts fast and quickly removes the dirt, grease, oil and grime from the workpiece. It breaks down the toughest greaser quickly and exceeds your expectations. This washing solvent works faster by the free rinsing formula and prevents unsightly white residue stains.
- Effective result: This petroleum solvent cleaning, varnish, hard carbon, sludge oil and grease. They clean them by involving chemical actions without causing damage to your workpiece.
- Safe to use: It is safe to use on plastic, rubber and most painted components. Also, when used on the aircraft structural metals, this washer solvent does not cause harm to plastics, paints or coating.
- Compatible: Compatible with most of the metal such as an alloy by cleaning them immensely. Also, this petroleum based cleaning solvent has a high capacity to hold grease, oil and soils in solution during rinsing and cleaning.
(10). OzzyJuice Parts/Brake Cleaning Solution -(Best heated parts washer solvent)
These OzzyJuice parts are a unique mixture of pH neutral which acts as emulsifiers and surfactants that contain no solvents. The biodegradable, non – toxic, non-caustic inflammable and non-hazardous oil dispersant and parts washer fluid is produced by the blending of it in the liquid form. Also, this heated parts washer solvent does not contain any OSHA or DOT regulated chemicals.
- Ph neutral: With this unique solution of pH neutral, this parts washer fluid emulsifies the grease and grime for the easy rinsing of the dirt, oil, and grease. It loosens up and surfactants that contain no solvents.
- Easy clean: With the technology of powerful concentration and such dilute nature, the excess dirt caught up under the hood of your engine is easily removed. Removing the dirt, oil, grease, grime from the plastics, metals, and the painted surfaces quickly, easily and safely, makes this is the best parts washer cleaning fluid.
- Use in heated washers only: It is important to note that you heat it to the proper temperature while using it. If the temperature is not appropriate then the microbes will not rightfully do their job and will break down the built-up dirt easily.
- Suitable for any diesel or gas parts: If you have a heater in your tank or any machine then this best cleaning fluid for parts washer is the best part washer solvent for you as it easily cleans diesel or gas parts that are dirty, it called parts cleaner tank.
You may check this informative video on Parts Washer Harbor Freight Upgrades and Lessons Learned
FAQs on the parts washer solvents in 2021
What is the best parts washer solvent?
The parts washer is also known by the term “harbor freight parts washer solvent”. A washer solvent is an important tool for the effective removal of the junks, contamination from a workpiece efficiently and quickly. They clean the grease, oil, dirt, carbon, grime, metal chips, mold release agents, paint, cutting fluid, corrosion and ink. The washer solvents are suitable to be used in both domestic and industries. This includes the pressured washers to degrease, clean, and dry the loads or the small or the large parts. The parts washer solvent can be used for domestic purposes to clean the junks and contamination. There are three types of washer solvent:
- Manual equipment,
- Automated spray equipment,
- Automated immersion equipment.
The manual equipment consists of a simple work station that includes the spray, brush and immersion cleaning. For cleaning of the workpiece, the brush works according to the combination of the chemical action and the mechanical action.
The automated spray equipment is a cabinet embedded by a lid which allows the parts washer to be brought onto a rotating work basket. The work basket allows the spray bars to apply the wash solution by the items. To achieve effective cleaning, it requires both chemical action and mechanical action.
The automated immersion equipment is an open tank embedded with a lift – lid which allows the work to be done for the effective and quick cleaning. The tank consists of the wash solutions which get introduced by both the chemical actions as well as the mechanical actions.
What are the advantages of solvent over the water?
Washing with water is not that effective and also it is limited. Most dirt and contamination also need chemical actions to remove them completely. The washer solvents are designed with a special formula in such a way that they provide a chemical action to the removal of such filths. Also, you do not have to worry about the harm the parts washer solvent may cause to your workpiece after being exposed to the chemical action. The best parts washer solvents included the ingredients which are non – toxic and eco – friendly. Therefore, they remove the dirt and grime from your parts without causing any damage to them under the influence of the chemical actions with the twin effect of the effectiveness and safety. Also, they are available at an affordable price. Also, it is to be noted that all the washer solvents do not carry the ability to cleaning the dirt and contamination without causing any damage to the workpiece.
How to clean your parts washer solvent?
Your washer will become useless if one of the parts of your product have any problem and will not get any replacement. Also, it must allow you to have a routine to clean your washer solvents for maintaining and retaining their efficiency for a longer period. To keep it functional, you must maintain the every parts washer solvents in a proper manner. They are cleaned by removing and replenishing the used solvents. There is also a method of cleaning the washer parts is by increasing the temperature which doubles the chemical reaction of the detergent. Without adding an adequate amount of soap in the bucket, you should not ass water for affecting the performance of the washer solvent for a longer period. It is important to do this as much as possible as the washer solvent if used continuously is contaminated by the grease, dirt and grim. Also make sure that when you are not using it, you must shut the door and lid of the washer solvent properly or else it would slowly moisture and gain oxygen which will lead to the corrosion of the metal. Moreover, it is important to be noted that the lid must be shut off as the covers are submerged in the water and anyhow the water may get splashed on them. Also, it is sometimes very tedious to remove and tear down the parts while cleaning. You should clean your tank at a consistent rate.
If given choice, I will choose the Simple Green parts washer solvent as it not only fast nut also safe in use and removes the oil, lubricants, and grimes from the washable surfaces. Also, it is easy to rinse and dilutes with the water and is concentrated in nature. It is best for the pressure washing, steam cleaning and maintenance and is safe for the food – preparation areas.
The listed washer solvents will not only give you effective cleaning but also a pleasant environment with herbal fragrance. According to your wish, you can buy any of the listed parts washer solvents.
Edmond Clark is a 34-year-old Blogger from California, USA. He is a Certified Market Research Professional (MRP) & a full-time blogger. His aim is to help the consumer to choose the best product from the market. Contact him for any of your queries.